google33175f2e3129d8c7.html

胜游亚洲

News

News

  • Hastelloy Alloy D-205

    MATERIAL CATEGORY: Cr-Ni-Mo-Cu-Si based alloy Hastelloy Alloy D-205 CHEMICAL COMPOSITION (WEIGHT %) C (%):      ≤ 0.030 Si (%):      4.00 ~ 6.00 Mn (%):    ≤ 1.50 P (%)≤:    0.025 S (%)≤:    0.010 Cr (%):     19.0 ~ 22.0 Ni (%):      Remainder Mo (%):    1.85 ~ 3.50 Co (%):     - W (%):...
    Read more
  • Corrosion resistance and Heat Treatment for INCONEL alloy 617

    Corrosion resistance: The composition of INCONEL alloy 617 includes substantial amounts of nickel, chromium, and aluminum for a high degree of resistance to oxidation and carburization at high temperatures. Those elements, along with the molybdenum content, also enable the alloy to withstand many...
    Read more
  • Oxidation and Carburization for INCONEL alloy 617

    Oxidation and Carburization : The resistance of INCONEL alloy 617 to cyclic oxidation at 2000°F (1095°C) is shown in Figure 9. The tests were performed on specimens of thin strip and consisted of cycles of exposure to temperature for 15 minutes followed by cooling in still air for 5 minutes. The ...
    Read more
  • Creep and rupture properties for INCONEL alloy 617

    Creep and rupture properties for INCONEL alloy 617 displays exceptionally high levels of creep-rupture strength, even at temperatures of 1800°F (980°C) and above. That characteristic, combined with good resistance to oxidizing and carburizing atmospheres, makes the alloy especially suitable for l...
    Read more
  • Stability of properties of Alloy 617

    Stability of properties: Alloy 617 exhibits good metallurgical stability for an alloy of its strength level. Table 7 shows changes in tensile and impact properties after exposures extending to 12,000 h at elevated temperatures. All samples were in the solutionannealed condition before exposure. T...
    Read more
  • INCONEL alloy 617

    INCONEL alloy 617 (UNS N06617/W.Nr. 2.4663) is a solid-solution, strengthened, nickel-chromium-cobaltmolybdenum alloy with an exceptional combination of high-temperature strength and oxidation resistance. The alloy also has excellent resistance to a wide range of corrosive environments, and it is...
    Read more
  • Capillary Tubes

    Capillary Tubes Suppliers produce these special types of tubes for some very sensitive applications. The applications are usually of measurement instruments. Shangdun special materials co.,ltd is a professional manufacturer and supplier of all kinds of stainless steel and nickel base alloy capill...
    Read more
  • C-276 alloy and its properties

    Alloy C-276 is an important nickel-based corrosion-resistant material. Because it contains about 16% (mass fraction) of Mo and Cr elements, it has strong resistance in oxidizing media and reducing media. Called the universal corrosion-resistant alloy. Compared with general stainless steel and oth...
    Read more
  • Weldability of alloy 825

    Alloy 825 is a Ni-Fe-Cr austenitic metal material containing a small amount of Al and Ti. It has corrosion resistance, high strength, high temperature oxidation resistance, and good weldability. When the Alloy 825 is welded, due to the segregation of impurities such as S and P in the weld metal, ...
    Read more
  • Hot workability of alloy 825

    alloy 825 has a narrow thermoforming range and high deformation resistance. After conducting hot compression and hot tensile tests on the 825 alloy, it was found that the shrinkage rate of the 825 alloy during hot stretching increased first and then decreased with the increase of the stretching t...
    Read more
  • Corrosion resistance of alloy 825

    Alloy 825 is a solid solution-strengthened nickel-based corrosion-resistant alloy. During hot working or heat treatment, carbides may be precipitated on the grain boundaries. These carbides adversely affect the corrosion resistance of the alloy 825. The SR101 reactor of a domestic spice manufactu...
    Read more
  • Basic characteristics of 825 alloy

    Alloy 825 is a nickel-iron-chromium solid solution strengthened alloy added with molybdenum, copper and titanium invented by Inco. It was developed for use in both reducing and oxidizing media. The alloy has resistance to chloride ion stress corrosion cracking, resistance to pitting corrosion, cr...
    Read more
  • A.S.W.G. American Standard Wire Gauge

    A.S.W.G. American Standard Wire Gauge Gauge No. Diameter Diameter Gauge No. Diameter Diameter inches mm inches mm 0 0.46 11.68 19 0.03589 0.9116 0 0.4096 10.4 20 0.03196 0.8118 0 0.3648 9.206 21 0.02846 0.7229 0 0.3249 8.252 22 0.02535 0.6439 1 0.2893 7.348 23 0.022...
    Read more
  • BWG – Birmingham Wire Gauge

    BWG – Birmingham Wire Gauge  Gauge Birmingham Wire Gage Birmingham Wire Gage BWG BWG (inches) (mm) 00000 (5/0) 0.5 12.7 0000 (4/0) 0.454 11.532 000 (3/0) 0.425 10.795 00 (2/0) 0.38 9.652 0 0.34 8.636 1 0.3 7.62 2 0.284 7.213 3 0.259 6.579 4 0.238 6.045 5 0.2...
    Read more
  • SWG – Standard Wire Gauge

    SWG – Standard Wire Gauge SWG Gauge inches mm 7/0 0.5 12.7 6/0 0.464 11.786 5/0 0.432 10.973 4/0 0.4 10.16 3/0 0.372 9.449 2/0 0.348 8.839 1/0 0.324 8.23 1 0.3 7.62 2 0.276 7.01 3 0.252 6.401 4 0.232 5.893 5 0.212 5.385 6 0.192 4.877 7 0.176 4.47 8 0.1...
    Read more
  • Gauge Size Chart

    Gauge Size Chart Gauge Size S.W.G. B.W.G. B.& S. A.S. A.S. J.de P. W.G. B.G. U.S.S. No. mm mm mm W.G. W.G. mm mm mm mm mm inch 0 12.699 12.45 0.49 12.7 0 11.785 14.73 11.72 0.4615 (PI)100 0.6 11.906 0 10.972 12.7 13.12 10.93 0.4305 (P)500 0.68 12.7 11.113 0 10....
    Read more
  • Ni-Cr-Mo-Cu corrosion resistant alloy

    The nickel-chromium-molybdenum-copper corrosion-resistant alloy was developed by adding Cu to the nickel-chromium-molybdenum alloy, mainly to improve its corrosion resistance in non-oxidizing acids, especially in phosphoric acid and sulfuric acid. Since the alloy contains both a high amount of Cr...
    Read more
  • Ni-Cr-Mo-Cu corrosion resistant alloy

    Nickel-chromium-molybdenum-copper corrosion-resistant alloys [1-7] were developed by adding Cu to nickel-chromium-molybdenum alloys, mainly to improve their corrosion resistance in non-oxidizing acids, especially in phosphoric acid and sulfuric acid. Since the alloy contains both a high amount of...
    Read more
  • Inconel 725

    Alloy 725 is a Ni-Cr-Mo-Nb-Ti-A1 corrosion-resistant alloy that has both high corrosion resistance and age hardening to extremely high strength. The corrosion resistance of this alloy is basically the same as that of the widely used Inconel 625 alloy. The age hardening 7M alloy has twice the stre...
    Read more
  • Hastelloy G-35

    The 00Cr33Ni55Mo8 (G-35) alloy was developed on the basis of Hastelloy G-30. Since the alloy increases the chromium to 33% and increases the molybdenum in the alloy to 8%, in order to make the alloy a single austenite structure, It is bound to increase the nickel content of the alloy, so the nic...
    Read more
  • NS 3301 alloy

    NS 3301 alloy is the lowest content of molybdenum in nickel-chromium-molybdenum corrosion-resistant alloy. It is mainly used for the above-mentioned simple nickel-chromium corrosion-resistant alloy 0Crl5Ni75Fe under the condition of low corrosion resistance and high temperature strength. 00Crl6Ni...
    Read more
  • Inconel 625 , NS 3306

    Inconel 625 alloy is a Ni-Cr-Mo corrosion-resistant alloy with good corrosion resistance and high strength. This alloy is especially suitable for service conditions requiring high corrosion resistance and high strength. Chemical composition and organizational structure The chemical composition of...
    Read more
  • Hastelloy C-2000

    Hastelloy C-2000 alloy is a new type of Ni-Cr-Mo corrosion-resistant alloy introduced at the end of the 20th century. The difference from 00Cr23Ni59Mol6 alloy is the addition of Cu. The addition of Cu improves the ability of the alloy to resist the reduction of acidic media, especially the abilit...
    Read more
  • alloy59

    Based on the 00Cr23Ni59Mo16 (Nicrofer 5923hMo-alloy 59, NS 3311) alloy, the improved Ni-Cr-Mo alloy is reduced by the chromium content and the iron content (Fe) is reduced to less than 1.5%. The high Ni-Cr-Mo corrosion-resistant alloy makes full use of the calculation results of electron vacancy ...
    Read more
  • Inconel 686, NS 3309

    Inconel 686, NS 3309 (00Cr21Ni58Mol6W4) is a modified Ni-Cr-Mo corrosion-resistant alloy that increases the Cr content in the 00Crl6Ni60Mol6W4 alloy to 21% and the Fe content to less than 1.0%. This improvement makes the alloy have both the corrosion resistance of the 00CH6Ni60Mo16W4 alloy and th...
    Read more
  • Hastelloy C-22, NS 3308 (00Cr22Ni60Mo13W3)—corrosions

    Corrosion resistance A general corrosion Tables 8-49 and 8-35 to 8-38 show the corrosion resistance of this alloy in various media. Looking at these data, the alloy has extremely high corrosion resistance in acetic acid, 10% FeCl3, formic acid, phosphoric acid, some concentrations of sulfuric aci...
    Read more
  • Hastelloy C-22, NS 3308 (00Cr22Ni60Mo13W3) physical and chemical features

    The 00Cr22Ni60Mo13W3 alloy is an improvement and development of the aforementioned several high Mo nickel chromium molybdenum alloys. Its chemical composition is characterized by extremely low C and Si contents, high Cr content, moderate Mo content and W content. Because of these characteristics,...
    Read more
  • hastelloy C-4—Physical properties and Application

    The physical properties of the alloy are shown in Table 8-43. Table 8-43 Physical properties of hastelloy C-4 alloy density(20*C) /g • cm -3 Melting point/℃ Resistivity(23t) /um• m coefficient of linear expansion/KT6!^1 29 – 93℃ 20 -204℃ 20-316℃ 20 -427℃ 24 -538℃ 24 &#...
    Read more
  • hastelloy C-4——Thermal processing, cold working, heat treatment and welding performance

    A hot processing This alloy does not contain W, so its high temperature deformation resistance is reduced. It is easier to hot work than the above two high Mo-containing Ni-Cr-Mo-W alloys, and the hot working temperature range is the same as hastelloy C-276. B cold working Hastelloy C-4 alloy has...
    Read more
  • hastelloy C-4 —general corrosion,intergranular corrosion,point corrosion

    The uniform corrosion resistance of hastelloy C-4 alloy is basically the same as that of hastelloy C alloy in various media. The most important feature of this alloy is that the C, Si and Fe contents are controlled at a low level, so the carbide and intermetallic phase precipitates are small, mak...
    Read more
  • hastelloy C-276——General corrosion

    The uniform corrosion resistance of hastelloy C-4 alloy is basically the same as that of hastelloy C alloy in various media. The most important feature of this alloy is that the C, Si and Fe contents are controlled at a low level, so the carbide and intermetallic phase precipitates are less, whic...
    Read more
  • hastelloy C-276 —— Mechanical properties

    The instantaneous mechanical properties of room temperature and high temperature of 00Crl6Ni65Mol6Ti ( hastelloy C-276 alloy) in different states are shown in Table 8-37~Table 8-39. From these data, it is known that the plasticity of this alloy does not decrease even after aging. The plasticity o...
    Read more
  • hastelloy C-276——Physical properties

    The physical properties of Hastelloy C-276 alloy are summarized in Table 8-36. density(221) Melting point Resistivity(24¾) Linear expansion coefficient/KT6!^1 /g • cm-3 /fift * m 24~93*C 24 – 204^ 24 ~316弋 24 -427^ 24 -538¾ 24 – 6491 8885 1323 - 1371...
    Read more
  • hastelloy C-276 —Hot working, cold working, heat treatment and welding performance

    Hot working, cold working, heat treatment and welding performance A hot working The thermal processing properties of Hastelloy C-276 alloy are similar to those of 0Crl6Ni60Mol6W4 alloy. Some thermal processing parameters can be referred to the latter. B cold working The alloy has good cold workab...
    Read more
  • hastelloy C-276 Corrosion resistance——pitting and crevice corrosion

    The pitting and crevice corrosion resistance of this alloy is shown in Table 8-33. The data show that the alloy has excellent pitting and crevice corrosion resistance in both the as-welded, solid solution and post-weld heat treatment conditions in some pitting and crevice corrosion resistance tes...
    Read more
  • hastelloy C-276 Corrosion resistance ——Intergranular corrosion

    The intergranular corrosion sensitivity of Hastelloy C-276, NS 3304, 00Cr16Ni60Mol6W4 alloy is much lower than that of 0Crl6Ni60Mol6W4 alloy. When it is sensitized or cooled after welding, the alloy still has secondary carbide and some intermetallic phases. W, the existence of these harmful phase...
    Read more
123 Next > >> Page 1 / 3